Bearing, Hub & Suspension

(The original suspension that I “ripped off and threw away” a few days ago)

Driving has been miserable for me for the last few weeks and it is all due to faulty wheel bearing. The loud rumbling sound comes from the wheels wherever I take a corner.

This is not the first time I am having faulty wheel bearings. I have lost count the number of times I had to spend money to get the bearing changed (and it is not cheap too – one set cost me RM75). This pain in the neck started in 2007 when I noticed the rumbling sound from the wheels and had to visit the nearest wheel shops in Puchong (my biggest mistake – little I knew back then that this shop was fraud and had used second rate parts).

I changed wheel bearings, rear wheel hub (which the fraudster claimed already been damaged due to faulty bearing. Well it could have but who is there to stop them from making a quick money) and shock absorbers (it was leaking but not sure due to what. Anyway, I have passed the 50,000 km lifespan for shock absorbers). I spend a lot of money for changes on that day and I thought my troubles will go away.

Unfortunately it did not…

Within weeks, the bearing became faulty again and this time, it happened when I was travelling on the highway. When I reached Taiping, I had the wheel inspected at a friend’s shop and found that the earlier shop have used imitation wheel bearing. It was prone to fail. So, I changed the wheel bearings again but it did not least long. Since then, I have changed the bearings several times and when I told the mechanics at my usual workshop, they started to look at other possible causes.

(Rear wheel hub – not exactly “new” new but at least it was not from “potong kereta”)

They took at good look at the rear hub and realised that the size was different for my car.

So, there was a change of hub as well and in order to reduce cost, I agreed to use second hand original rear hub (from “potong kereta” shop). But after a while, the bearings once again got faulty. There was one point where the bearings had cracked in the inside and the wheel almost came off. So this time, I opted to change to a brand new rear hub (which had me waiting for whole day because they ordered from a shop in KL). That solved the problem but only temporarily.

In the last few weeks, the rumbling sound from wheels was back and I was getting rather pissed off with it. I have spent so much money and yet nothing seems to be getting solved permanently.

Then I looked the other thing that was changed in the fraudsters’ shop – the shock absorbers. To be fair, they used the original (so I think) KYB shock absorbers but realised that after the change, the body roll of my car during the cornering have increased tremendously. Further the suspension felt soft. In fact, it was way too soft for me to take cornering safely (it was not the same when I had the original Proton shock absorbers).

Could this be the other culprit that causing faulty wheel bearings? After all, at the cornering the soft suspension would have put a lot of pressure on the wheels; it could have contributed to the bearings getting damaged.

So, I decided to change the suspensions as well. Besides I have passed the next 50,000 km mark and soft absorbers was not right for my kind of driving. The guys at the workshop recommended KYB gas shock absorbers but I had enough with that brand. But the mechanic clarified something to me. The “soft” shock absorbers that I have now are using oil for compression. His recommended shock absorbers use gas for compression. That will solve the “softness” of the suspension that I been having. In fact, according to the mechanic, the original Proton shock absorbers that my car was also using gas for compression (which could explain why I did not have the same softness before the change was made).

But still the brand KYB had become a phobia for me.

Then I remembered my buddy, Yusof talking about Monroe brand shock absorbers. It was RM20 – RM50 more costly than the KYB gas shock absorbers but it was worth the investment. The shop quoted me RM100 for rear wheel absorbers and RM195 for the front struts. Total cost to replace suspension for all 4 wheels – RM590. I still had to change the wheel bearings though. Plus the usual oil change, spark plug change and change of radiator hoses (which I was told to be inspected and changed at every 40,000 km) cost me a whopping RM1,045.

Driving the last 2 days has been fun especially at the cornering. The softness has gone completely and the body roll has reduced by almost 80%. The ride has been firmer too. The Ducaros seems quieter too.

It is yet to be seen whether the bearings will hold up longer this time but if it doesn’t, then I may need to change my car too.

Advertisements

6 thoughts on “Bearing, Hub & Suspension

  1. Oh man, the fraudster at the first shop you went to, caused a lot of damage to your car! all the parts they used were faulty! Damn, reading that making people pissed off. Shall publish the name of the shop so people will not patron that shop.

    Like

  2. Kavi – ya bro, my life and those who ride in my car worth much more than RM590…which is why I closed one eye as I paid for the repalcements

    Bongkersz – I thought about it immediately after I got to know that the shop used second rate parts but then documents got misplaced and it will be their words against mine. Need to tread this more carefully but whenever possible, I have spread the words about this shop to my friends and family members. Hmm, perhaps need to bring it up at blogsphere level

    Like

Please let us have your reply...

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s